PSC series Constant Current Controller

PSC series Constant Current Controller

Intelligent identification of light source power, and output corresponding current value      
RS-232/EIA-485 communication protocol for selection.            
Constant current accuracy up to 1%      

Model PSC3-1005-4-LS/EIA    
Lighting Method Continuous / trigger lighting     
Input voltage AC100-240V    
Drive method Constant-current system    
Brightness control Current control    
No. of channels 4    
Over current protection Current over 110% protection. Reset after turning the power off and on again. 
Trigger function DC5-24V    
Output power (rated) 4CH Total 12W
Output current  (rated) Single CH 700mA    
Lighting delay < 50us     
Light level control 0~255 steps    
Weight (kg) 0.8    
Dimension(mm) 107X100.6X130.3    
Working environment Temperature -10~50℃ / Humidity 20~85% RH (with no condensation)    
Storage environment Temperature -20~65℃ / Humidity 20~85% RH (with no condensation)    
Cooling method Forced air (Fan)    
Material surface treatment SPCC painting    
Accessory AC cord, EIA-485-3-B / LS-232-3-B communication cable,
extension cable
PSC3 - 10 5 - 4   LS/IEA
Model   Power Output Voltage   Channel numbers   Communication

1. Communication parameter
Protocol Working mode Communication
Transport format
RS-232 /EIA-485 Half-duplex mode 19200bps Start bit Data bit Check bit Stop bit
1 8 0 1

Controller External Trigger Definition (PSC3-1005-4)
Trigger Port No   Trigger  Definition  
1+ CH 1  Trigger Input +   
1-  Trigger Input -  
2+ CH 2  Trigger Input +   
2-  Trigger Input - DC5-24V input
3+ CH 2  Trigger Input +   
3-  Trigger Input -  
4+ CH 4  Trigger Input +   
4-  Trigger Input -  

1. RS-232 communication cable (through) has a standard length for selection, and the communication cable has a shielding layer
2. RS-232 uses only 2, 3 and 5 pins for communication, which are respectively receiving line RXD, sending line TXD and signal ground line GND"

Recommend Read